The parts to be attached to the PCB are
shown at left. Identify each one, and lay them out where you can keep
track of them. The letters indicate the recommended order of assembly.
(An
Excel spreadsheet with a suggested supplier and details about how
to order each part is available through
the link at the bottom of this page.)
| A |
Printed Circuit Board |
1 |
| B |
Resistor, 10 kohm, 1/8 W |
1 |
| C |
Resistor, 220 ohm, 1/4 W |
1 |
| D |
Diode, 1N4001 |
1 |
| E |
Socket, DIP, 14 pin |
2 |
| F |
Socket, DIP, 16 pin |
1 |
| G |
Modular Jack, 6P6C |
1 |
| H |
Voltage Regulator, 5 V |
1 |
| I |
Fuse, 0.75 A |
1 |
| J |
Fuse, 0.30 A |
1 |
| K |
KED Assembly |
1 |
| L |
Header, 3 position |
1 |
| M |
Power Jack, 2.1 mm |
1 |
| N |
Terminal Block, 6 position |
1 |
| O |
Speaker Jack |
1 |
| P |
IC, 7408, Quad AND gate |
1 |
| Q |
IC, 7404, Hex Inverter |
1 |
| R |
IC, ULN2003A, Darlington Array |
1 |
| S |
Standoff, Nylon, 0.5"
|
4 |
| T |
Screw, 4/40 - 0.25" |
4 |
| U |
Shoulder washer, #4 |
4 |
Click here for a spreadsheet with details about each part.
|
