The parts that will be soldered to the PCB
are shown at left. Identify each one and lay them out where you can
keep track
of them. The letters indicate the recommended order of assembly.
| A |
Printed Circuit Board |
1 |
| B |
Resistors, 220 ohm (red, red, brown) |
4 |
| C |
Diode, 1N4001 |
1 |
| D |
Socket, 16 pin, DIP |
1 |
| E |
LEDs (red, yellow, green, orange) |
4 |
| F |
Capacitor, 47 micro F, radial leads |
1 |
| G |
Phone jack, 6P6C |
1 |
| H |
Straight header, 6 position |
1 |
| I |
Right-angle headers, 3 position |
4 |
| J |
Terminal block, 2 position |
1 |
| K |
Terminal block, 6 position |
1 |
| L |
Voltage regulator, 7805 |
1 |
| M |
Power jack, 2./1 mm |
1 |
Click here for a spreadsheet with details
about each part.
|
